Power

LiPo Battery GNB 4s 750mah
translation missing: en.products.product.regular_price $26.95
translation missing: en.products.product.regular_price $26.95

Specification

 

Model No.

GNB7504S80A

Capacity

750mAh

Configuration

4S1P

Nominal Voltage

14.8V

Dimension

31*28*62mm Appr.

Weight

94g (+/-3g)

Max cont. discharge (C-rate/current)

80C

Max Burst(3Sec) (C-rate/current)

160C

Charge Connector

XT-JST 5P

Discharge Connector

XT30

Working Temperature Charge

0~45°C

Working Temperature Discharge

(-20~60°C)

Working Humility

65%RH +/-20%

Storage Temperature

(-20~35°C)

Storage Humility

65%RH +/-20%

Life Cycle

300+ times

Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

2 x Panasonic NCR18650G 3600mAh 18650 Li-ion batteries
translation missing: en.products.product.regular_price $25.95 Sold Out
translation missing: en.products.product.regular_price $25.95 Sold Out

2 x Panasonic NCR18650G 3600mAh 18650 Lithium Li-Ion batteries

Plus a free case 

Currently the highest capacity 18650 available (August 2019) anything higher is misleading.

High capacity battery to suit the FrSky Taranis X-Lite Battery Cap Design for 18650 Battery

NCR18650GA NNP Series battery Specifications: - 

Nominal Voltage : 3.6V

Nominal Capacity: 3550mAh (typ.) 

Standard Charge current : 1475 mA

Max Charge Voltage (CC/CV): 4.20V

Min Discharge Voltage: 2.5V

Max Cont. Discharge Current: 10A (almost, PTC will cut in half way through continuous discharge at 10A)

8-9A continuous without PTC cut<span"> depending on ambient temperature

Flat Tops, will not make contact in series end to end

Dimensions: 18.4 x 65.2

Weight: 48.5g

Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

Bonka Battery
translation missing: en.products.product.regular_price $14.95
translation missing: en.products.product.regular_price $14.95

Specifications:

Capacity: 600mah
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 45C Constant
Burst: 90C
Balance Plug: JST-XH
Discharge Plug: XT-30
Weight: 57g
Dimensions: 14*31*56mm

Charge: Suggest 1C, Max 5C (Don't suggest)

Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

Bonka Battery
translation missing: en.products.product.regular_price $24.95
translation missing: en.products.product.regular_price $24.95

Specifications

Capacity: 850mah
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 75C Constant
Burst: 150C
Balance Plug: JST-XH
Discharge Plug: XT-30
Weight: 87g
Dimensions: 25x30x60mm

Charge: Suggest 1C, Max 5C (Don't suggest)

Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

Lipo Battery Drone Safety Handbag
translation missing: en.products.product.regular_price $9.95
translation missing: en.products.product.regular_price $9.95

The safety handbag is stitched together with an extremely strong fire retardant thread and has a double-zipper lid. It offers extra protection for your lipo battery, micro drone, and your charging location, which could protect your home and valuables from a fire due to a lipo battery failure. Useful for storage, travel, and charging.

Bag Specifications

Features

  • Waterproof, fireproof, and radiation protection
  • Large space to place multiple batteries
  • Middle spacer, battery can be classified
  • Double zipper, makes the lipo safe bag well-sealed and convenient to use
  • This flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage
Battery Storage

Specification

  • Color: Black
  • Dimension: 165*90*120mm
  • Weight: 130g
  • Application: For safer charging and storage of Lipo batteries and drone
  • Material: Textile Fiberglass Material with Fire retardant coating

    Bag Dimensions

    Package

    • 1 * Lipo Battery Drone Safety Handbag
    Tattu 450mAh 3S1P 75C long size with XT30 plug
    translation missing: en.products.product.regular_price $19.95
    translation missing: en.products.product.regular_price $19.95

    Features:

    - Remarkable stacking technology enables single-cell capacities of 450mAh.
    - High discharge performance and high energy density.
    - Superior Japan and Korea Lithium Polymer raw materials.
    - Standard XT-30 Balance Plug + Equipped with industry-standard XT-30 plug

    All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. 

    Specifications:
    - Capacity: 450mAh
    - Voltage: 11.1V / 3S / 3 Cell
    - Discharge Rate: 75C
    - Max Burst Discharge Rate: 150C
    - Weight: 45g
    - Size: 63mm x 16mm x 21mm (L x W x H)
    - Connector Type: XT30

    Applications:

    Tattu batteries provide high quality, reliable power for your Multirotor FPV, especially 120-sized and 150-sized micro H-frame quad!

    Tattu 4S 650mAh 75C 14.8V Lipo Battery Pack  with XT30 Plug
    translation missing: en.products.product.regular_price $28.95
    translation missing: en.products.product.regular_price $28.95

    All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction, and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high-quality battery. 

    Features:

    - Remarkable stacking technology enables single-cell capacities of 650mAh.
    - High discharge performance and high energy density.
    - Superior Japan and Korea Lithium Polymer raw materials.

    Specifications:

    - Minimum Capacity: 650mAh
    - Configuration: 4S1P / 14.8V / 4 Cells
    - Discharge Rate: 75C
    - Max Burst discharge Rate: 150C
    - Net Weight(±20g): 70g
    - Dimensions: 59mm Length x 31mm Width x 21mm Height
    - Charge Plug: JST-XHR-5P
    - Discharge Plug: XT-30

    Application: 

    Tattu 650mAh 4S1P 75C 14.8V Lipo battery with XT30 plug provide high quality, reliable power and it is specially designed for your 90-150mm size FPV quadcopters.

    Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

    Tattu 3S 450mAh 75C 11.1V Lipo Battery Pack with XT30 Plug
    translation missing: en.products.product.regular_price $14.95
    translation missing: en.products.product.regular_price $14.95

    All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction, and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high-quality battery. This battery is idea for DIATONE GT-R249HD.

    Features:

    - Remarkable stacking technology enables single-cell capacities of 450mAh.
    - High discharge performance and high energy density.
    - Superior Japan and Korea Lithium Polymer raw materials.

    Specifications:

    - Minimum Capacity: 450mAh
    - Configuration: 3S1P / 11.1V / 3 Cells
    - Discharge Rate: 75C
    - Max Burst discharge Rate: 150C
    - Net Weight(±20g): 42g
    - Dimensions: 45mm Length x 24mm Width x 21mm Height
    - Charge Plug: JST-XHR-4P
    - Discharge Plug: XT-30

    Application:

    Equipped with Standard XT-30 & Balance Plug, specially designed for your 90-150 size FPV.

    Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

    250mah 30C 1S Battery
    OFFER
    translation missing: en.products.product.regular_price $6.95 $5.95 On Sale
    translation missing: en.products.product.regular_price $6.95 $5.95 On Sale

    Capacity: 250mAh
    Voltage: 3.8v
    Continuous Discharge Rate: 30C
    Instantaneous discharge rate: 60C
    Size: 55mm x 12mm x 7mm
    Weight: 6.5g
    Connector: PH2.0

    Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

    Bonka Battery
    OFFER
    translation missing: en.products.product.regular_price $25.95 $15.95 On Sale
    translation missing: en.products.product.regular_price $25.95 $15.95 On Sale

    Specifications:

    Capacity: 460mah
    Voltage: 4S1P / 4 Cell / 14.8V
    Discharge: 75C Constant
    Burst: 150C
    Balance Plug: JST-XH
    Discharge Plug: XT-30
    Weight: 71g
    Dimensions: 21x30x55mm

    Charge: Suggest 1C, Max 5C (Don't suggest)

    Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

    BT2.0 Connectors
    translation missing: en.products.product.regular_price $11.95
    translation missing: en.products.product.regular_price $11.95

    BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. 

    Since February 2019, BetaFPV got some feedback on Facebook about how eager they need the high quality of BT2.0 connector on 1S whoop drone. So BetaFPV started their long-term investigation on the design of the 1.0mm banana connector and the stable manufacturing technique to meet pilots' demand. Betafpv always keeps moving forward with passion for breakthrough experiences.

    BT2.0 Series

    BULLET POINTS

    • BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to banana connector and increasing the cross-sectional area of banana connector.
    • With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. 
    • By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
    • Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle on Meteor65 if you use our BT2.0 300mah 1S Battery. 
    Positive and Negative

      SPECIFICATION

      • Size: Male Connector - 6.0*4.2*10.5mm / Female Connector - 6.0*4.2*8.3mm 
      • Weight: Male Connector- 0.34g/PCS / Female Connector - 0.24g/PCS
      • Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.

      BT2.0 Connector

      BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(15A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag.

      1s 300mAh

      There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

      Discharge Graph

      Much more choices of BT2.0 series accessories.  
      We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. 

      • BT2.0 Connectors (10pcs)
      • BT2.0 1S Whoop Cable Pigtail
      • BT2.0-PH2.0 Adapter Cable
      • BT2.0 Battery Charger and Voltage Tester 
      • BT2.0 Connector 1S Lipo Charger Board
      • BT2.0 300mAh 1S Battery

      Here is Mr ShutterBug'vedio to show you the way of replacing connectors safely.

      PACKAGE

      • 5* BT2.0 Female Connector & 5 * BT2.0 Male Connector
      BT2.0 Connectors 6pcs
      translation missing: en.products.product.regular_price $11.95
      translation missing: en.products.product.regular_price $11.95

      BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. 

      BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.

      BT2.0 Connector

      BULLET POINTS

      • BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
      • BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
      • By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
      • With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.
      Fitted


          SPECIFICATIONS

          • Item: BT2.0 1S Whoop Cable Pigtail
          • Wire Type: 22AWG
          • Connect: BT2.0 Male Connector
          • Length: 55mm (Not included the plug)
          • Weight: 0.91g/pc
          • Battery: BT2.0 300mAh 1S Battery
          • FC: F4 1S Brushless FC
          Cable Dimensions

            HOW TO RESOLDER YOUR BOARD WITH BT2.0 CABLE

            BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-).When you resolder your board, please pay attention to the connection method.

            Flight Controller Connection
            Here is Mr ShutterBug'vedio to show you the way of replacing connectors safely.

            BT2.0 Connector

            BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(15A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag. For more instruction, click here to reach.

            BT2.0 1S

            There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

            Discharge Graph

            Much more choices of BT2.0 series accessories.  

            BetaFPV know some pilots might have a question about how to deal with the old PH2.0 1S battery. So they provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. 

            PACKAGE

            • 6 * BT2.0 1S Whoop Drone Female Power Cable
            GNB 6s 650mah
            translation missing: en.products.product.regular_price $37.95
            translation missing: en.products.product.regular_price $37.95

            Specification

             

            Model No.

            GNB6506S80A

            Capacity

            650mAh

            Configuration

            6S1P

            Nominal Voltage

            22.2V

            Dimension

            40*29*64mm Appr.

            Weight

            124g (+/-5g)

            Max cont. discharge (C-rate/current)

            80C

            Max Burst(3Sec) (C-rate/current)

            160C

            Charge Connector

            JST-XH 7P

            Discharge Connector

            XT60 (xt30 pictured but not included)

            Working Temperature Charge

            0~45°C

            Working Temperature Discharge

            (-20~60°C)

            Working Humility

            65%RH +/-20%

            Storage Temperature

            (-20~35°C)

            Storage Humility

            65%RH +/-20%

            Life Cycle

            300+ times

             

             

            Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

            2 x Panasonic NCR18500A 2040mAh 18500 Li-Ion batteries
            translation missing: en.products.product.regular_price $22.95
            translation missing: en.products.product.regular_price $22.95

            2 x Panasonic NCR18500A 2040mAh 18500 Lithium Li-Ion batteries

            Plus a free case

            The positive pole is very slightly raised and works in the FySky Taranis X-Lite Radio without any modifications.

            If you would prefer longer battery life then please see our listings for 18650 parts to suit the FySky Taranis X-Lite Radio.

            Specifications: NCR18500A

            Nominal Capacity                       2040mAh

            Nominal Voltage                         3.6v

            Charging Method                       constant Current - Constant Voltage

            Charging Voltage                       4.2v

            End Voltage                              2.5v

            Charging current (Std)               1400mA

            Ambient Temperature                0 to +40Deg C (charge) , -20 to +60Deg C (discharge)

            Weight Approx.                        33.5g

            Dimensions (Max.)                   18.15 x 49.4 mm

            Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.

            Tattu 3S 850mAh 45C 11.1V Battery Pack with XT30 Plug
            translation missing: en.products.product.regular_price $14.95 Sold Out
            translation missing: en.products.product.regular_price $14.95 Sold Out

            Tattu 850mAh 11.1V 45C 3S1P Lipo Battery is made for FPV fans. It comes in a very lightweight of only 76g. It also offers you 45C exposure rate, giving you enough pouch no matter you are racing or freestyle.

            Features:

            - Remarkable stacking technology enables single-cell capacities of 850mAh.
            - Superior cell matched consistency.
            - Automatic production line to guarantee high quality and consistent performance.
            - Tattu batteries provide high quality, reliable power for your Multirotor FPV 150 size.
            - Local after-sales service(located in Dublin, CA)

            Specifications:

            - Minimum Capacity: 850mAh
            - Configuration: 3S1P / 11.1V / 3 Cells
            - Discharge Rate: 45C
            - Max Burst Discharge Rate: 90C
            - Net Weight(±20g): 76g
            - Dimensions: 60mm Length x 30mm Width x 22mm Height
            - Balancer Connector Type:JST-XHR

            Compatible with:

            Tattu 850mAh 11.1V 45C 3S1P Lipo Battery compatible with FPV in 150 size. Standard Balance Plug and Equipped with industry-standard XT-30 plug.

            Please note that orders containing batteries will be sent as 'Road Transport Only' and cannot be sent by Express Post.