iFlight
iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording near jellofree footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-4S.
Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello!
Features:
- Ultra-light but high performance
- JELLOFREE durable carbon/plastic construction
- No props or prop guards in view
- Upgradeable, versatile, futureproof
Specification:
- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16x16 Tower 2-4S
- iFlight 1103 motors (1.5mm shaft)
- Caddx.us Turtle v2 HD FPV cam
- Gemfan 1635 40mm 3/4 blade OR HQ 1.6x1.6x4
- iFlight Prop Guards 40mm
SucceX Mirco F4 Flight Tower System 16x16mm
SucceX F4 Flight Controller
-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target : MATEKF411
SucceX Mirco 12A Brushless ESC
-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g
SucceX Mirco VTX
-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g
Motor kV Variants:
-We offer several motor setups to fit your desired performance, equipment or just preference.
-(2S), (3S) will be available.
SD card insert and ejection:
-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.
VTX control implementation:
-VTX can be conveniently set up in your OSD.
Propeller recommendation:
-Gemfan for general use, durable prop, crash resistant!
-HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant!
Receivers available currently:
-Frsky XM+
-Flysky FS-A8S
-Futaba FT4X
-SDMX RM601X
Optional:
-Frsky XM
-Frsky R-XSR
-Flysky IA8X
Package Included:
1 x CineBee 75HD
1 set Gemfan 40mm props
1 set HQ micro whoop props
Brand name: iFlight
Item name: Handbag with tool set
Type: Roll
Package Included:
1 x Tool bag*1
1 x Motor clamp *1
1 x Utility knife *1
1 x Scissors *1
2 x Tweezer*2
1 x Ratchet wrench *1
1 x Needle-nose pliers
1 x Curved nose pliers*1
1 x Hexagon socket screwdriver 1.5MM
1 X Hexagon socket screwdriver 2.0MM
1 X Hexagon socket screwdriver 2.5MM
1 X Hexagon socket screwdriver 3.0MM
1 x Hexagon screwdriver sleeve 4.0 5.5*1 7.0*1
1 x Phillips screwdriver
2 x Small screwdriver
2 x Red battery cable tie 20*250MM
2 x Black battery cable tie 20*200MM
PRODUCT DESCRIPTION
SucceX F4 Flight Controller (V1.5)
-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-Betaflight OSD :YES
-Blackbox FLASH: 8MB
-BEC 5V 2.5A cont.
-Size: 21mm*21mm
-Mounting holes distance: 16*16mm
-Weight: 2.5g
-Firmware : betaflight_4.0.5_STM32F411.hex
-CLI dump file: IFF411_PRO.config
SucceX Micro 12A 4-in-1 ESC(w/plug)
-Firmware: G-H-30 BLS 16.7
-BLHeliSuite: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC: NO
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g
5.8G 200mW Micro VTX
-Power: PIT/25/100/200mW
-Antenna interface: IPEX (UFL)
-VTX protocol : IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g
Downloads:
*SucceX Micro,Whoop)IFLIGHT_F411_PRO.config
*SucceX Micro 16x16,SucceX Whoop FC Firmware(beta flight 3.5.7)
*SucceX Micro 16x16,SucceX Whoop FC Firmware(beta flight 4.0.4)
Package Included:
1 x SucceX Micro F4 Flight controller (M3 hole)
1 x SucceX Micro 12A Brushless ESC (M3 hole)
1 x PIT/25/100/200mW VTX (M3 hole)
Replacement parts:
Replacement 200mw VTX
NOTE: ESC V1.5 is compatible with V1.3
PRODUCT DESCRIPTION
SucceX Micro F4 Flight Tower System 16x16mm
Specification:
SucceX F4 Flight Controller
-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target : MATEKF411
SucceX Micro 12A Brushless ESC
-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g
SucceX Micro VTX
-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g
Package Included:
1 x SucceX F4 Flight controller
1 x 12A Brushless ESC
1 x PIT/25/100/200mW VTX
PRODUCT DESCRIPTION
CineBee 75HD Duct
Package included:
4pcs x CineBee 75HD Ducts
PRODUCT DESCRIPTION
Super durable and ultra-light, these 1103 motors only weigh 3.5g with a short cable. This motor was customized for the CineBee 75HD Whoop drone.
Features
-1103 brushless motors are customized for 2-3S brushless whoop drone.
-Shaft Diameter: 1.5mm, Weight: 3.5g
-Compatible with 2-3S lipo battery
Specifications
-Height: 10.2mm-Weight: about 3.5g
-Shaft: φ1.5mm
-Motor Mount Holes: M1.6 on Dia 8.5mm
-KV (rpm/V): 2-3S
-Voltage: 2-3S Lipo battery
Package included:
1 x CineBee 1103 Micro Brushless Motor
PRODUCT DESCRIPTION
Flexible combination: Change the space combination, storage 4 DJI Spark batteries / 3 Dji Mavic Pro Batteries/ 2 Dji Phantom3/4 batteries.
Safeguard lipo battery: This flame retardant bag is a convenient way of safeguarding your lipo batteries during charging, transit, and storage.
Always remember to comply with charging and safety guidelines and never leave charging or damaged Lipo batteries unattended.
Description:
Brand Name: iFlight
Material: Pvc Material
Size: 7.48x9.45x2.36 inch
Weight: 151.2g
Color: black
Main Feature:
Intensive Protection: Heat resistance, explosion proof
Warning:
1. Never leave the charging battery unattended.
2. Always ensure the battery is on a non-flammable surface.
3. Ensure flap is sealed while charging.
4. The lipo safe bag is intended to reduce the chances of damage in the event of a lipo fire
Package includes:
1 x Lipo Battery handbag
Brand name: iFlight
Package Included:
1 x Hexagon socket screwdriver 1.5MM
1 X Hexagon socket screwdriver 2.0MM
1 X Hexagon socket screwdriver 2.5MM
1 X Hexagon socket screwdriver 3.0MM
PRODUCT DESCRIPTION
iFlight Hip-hop hat
The “iF” simple Logo is embroidered in white on the front, a full "iFlight" on the side of the hat and cute "FPV DOG" pattern with red team iFlight letters on the back of the hat.
The cool " hip-hop" cartoon is made on the front brim. The hat is a "Hip-hop" style with an adjustable snap band enabling a good fit for almost any head size.
Specification:
-Brand name: iFlight
-Item name: hip-hop hat
-The material of appearance: Cotton
-The material of liner: cotton
-Colour: Black and cartoon
Package included:
1x hip-hop hat
PRODUCT DESCRIPTION
-Brand name: iFlight
-Item name: baseball caps
-The material of appearance: Cotton
-The material of liner: cotton
-Color: Black
-Adjustable Size
Package included:
1x baseball cap
Description
- Description
- FPV antenna, ABS material shell, 5.8g durable antenna
- Short and small, easy to install on your quad drones
- Works great as both a transmitting or receiving antenna
- Stubby antenna inside may be rattling, the rattle is normal, it's solid once screw on
Includes
1 x RHCP Super Mini Stubby 5.8GHz 5dbi Antenna SMABrand Name: IFlight
Item Name: M5 T Type Screw Wrench
Application: Quick Release M5 Propeller Motor Nut
Package Included:
1 x M5 Screw Wrench
Brand name: iFlight
Item name: AMASS XT60 Female to XT30 Male Adapter with 16AWG Cable
Wire diameter: 16AWG silicone wire
Wire length 10CM
XT30 and XT60 adapter.
The XT30 end is male and the XT60 end is female.
It is suitable for turning the XT30 head of the battery into the XT60 head, and then convenient to connect with the charger or ESC.
Package Included:
1 x Adapter with Cable
PRODUCT DESCRIPTION
It is made of high-quality fine hook and loop to secure the battery pack to your model with a slot for adjusting to ensure a firm and secure fit.
Package Includes:
4pcs x Red Battery strap 10 x 130mm