Mobula7 improvement frame , new materials, more durable, more light
Color option: Transparent or Transparent Black
Model: M7FRAME V2
Propellers: 40mm 3blades or 4blades
Motors: Happymodel 0603/0703/0802 Brushless motor
Flight controller : Crazybee F3 , Beecore BL , Beecore omnibus Crazybee F3 PRO. Crazybee F4 PRO
Battery: 1S Lipo Lihv 450mah or 550mah or 2S 250mah/300mah
Happymodel Mobula7/HD V3 Frame - Smoke Black/Transparent
New design, more durable than V2 , with Mobula7 Led_strip mount hole
The smoke black color v3 frame is original for Mobula7 HD
could fit the bellowing batteries:
Happymodel 2S 300mah
Happymodel 3s 300mah
GNB 2S 300mah
GNB 3S 300mah
Compatible for Happymodel 0603/0703/0802/EX1102 seires brushless motors
- Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity centre is reduced and improved the sense of compactness.
- Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes the frame more aesthetic. It provides you with more durable and smoother flight experience.
- The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller.
- The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors.
- Item: Meteor65 frame
- Material: PP
- Size: 65mm
- Weight: 3.14/pc
- Color: Transparent/Blue/Black/Green/Pink/Orange
- Motor mounting hole: For 0603 motor and 080X Series Motors
- FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
- With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.
- Using triangle bilateral stretch structure makes frame more aesthetic.
- Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller.
- Propellers:31mm 3-blade props
- Motors: 0603 and 080X Series Brushless Motors.
- Batteries: BT2.0 300mAh 1S Battery
- FC: F4 1S Brushless FC
- 1 * Meteor65 Micro Brushless Whoop Frame
Please note that the MK2 frame is designed for HD models. If you would like to use this frame for the Non-HD model it will require the Damping Accessories Package sold separately
DIATONE GTR 249/349 HD V2 MK2 Bottom Plate
R249 HD MK2 3mm thickness
R349 HD MK2 4mm thickness
（Does not contain the Damping Accessories Package - Required for non-HD models or if missing）
Damping Accessories Package
Rubber ring M7*2 5pcs
Blue Rubber Ring 5Pcs
M 3 Aluminum Pipe 8pcs
Some M3 spacer pad
（ Does not contain the Bottom Plate - Frame）
Used for Bwhoop 75 / Mobula7 frames v2/ Mobula7 frames v3
The short rubber damping ball used for the front, the long rubber damping ball used for back in order to keep the flight controller from loosening when plug or unplug the USB
- Long Rubber damping balls 3pcs
- Short Rubber damping ball 1pcs
- M1.2*7 Screws 4pcs
HX115 frame comes with matte and glossy versions, which adopt the spraying process with an insulating effect on frame surface, effectively reducing the possibility of component damage caused by electric current.
- Newly structure design, R0.5 chamfer, and 4mm thickness make HX115 T700 carbon unibody frame become ultimate durability and aesthetic while maintaining minimal weight
- Apply upgraded T700 carbon fiber material, stronger crashworthiness compared to the initial T300 frame.
- Package includes no-slip rubber pads, screws and battery cable tie for easier self-assembly
- Material: Carbon Fiber
- Diagonal motor distance: 115mm
- Thickness: 4mm
- Motor mounting hole: M2*4
- FC mounting hole: 26.5mm x 26.5mm
- Weight: 9.4g
- Propellers: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props
- Canopy: Canopy for HX115
- Motors: 1105 5000KV Motors / 1106 5000KV Motors / 1204 5000KV Motors
- Batteries: 450mAh 4S battery / 450mAh 3S battery
- FC&ESC: Toothpick F4 2-4S 12A AIO FC
- Drone: HX115 FPV Toothpick Drone / HX115 HD Toothpick Drone
- 1 * HX115 Carbon Fiber Frame
- 1 * 150mm Battery Cable Tie
- 1 * No-Slip Rubber Pads
- 1 * Pack of Screws
- 1 * Ruber dampers
- 8 * HX115 aluminum column
It’s innovative. It has grip. It’s got style. And best of all? It’s Armattan.
The Gecko is the latest addition to Armattan’s family of mini-freestyle frames. Designed around the best principals that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the multirotor kingdom has to offer.
The tail provides the quality mounting options that Armattan is known for. A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props. If that doesn’t suit your fancy, simply use the elongated M3 holes to zip-tie your dongle in the tried-and-true way instead. Lastly, lets put an end to rear-impact delamination. The carbon itself is protected from impacts by the custom Aluminum standoffs.
And what about the “big W?”
We’re glad you asked. Like you might’ve thought, the entire frame is warrantied. Carbon, aluminium, and titanium are covered under Armattan’s unbeatable lifetime warranty. What can we say, except, “you’re welcome?”
2x Camera-cage braces
8x 6mm button-head M3 bolts
4x 4mm button-head M3 bolts
4x 16mm buton-head M3 bolts
2x 5mm cup-head M2 bolts
2x M3 sunk nuts
2x Camera-saver braces
1x 19.1mm Front standoff (silver)
2x Rear standoffs (black)
4x M3 nuts
1x 2mm Top (LiPo) plate
1x 3mm Main plate (3 inch)
1x Lipo strap
1x LiPo foam pad
4x Dog-bone landing pads
1x Molded rubber VTx antenna holder
|Motor to Motor||139mm|
112mm left & Right
82mm front & rear
|Main Plate Thickness||3mm|
|Hardware||TI camera cage
Aluminium Cam saver
|Motor Mount Pattern||14XX motor pattern|
|Front Stack Mount||M2, 20x20mm (for HD cam board)|
|Rear Stack Mount||M3 20x20mm (for FC stack)|
|FPV Camera Mount||Micro compatible|
|Max Stack Height||22mm|
|Warrantied Parts||All frame components|
|Motor Size||1407 3650KV|
|LiPo||650mAh – 850mAh 4S|
Introducing the Armattan Tadpole.
- 65mm props
- Top-mounted lipo as it makes more sense for a small fun flyer/ freestyle frame.
- Custom aluminium front cage fully protecting a nano cam
- Custom shorter rear aluminium posts
- New rubber moulded VTX antenna mount that is modular with the custom aluminium rear posts. No bolts needed.
- Slightly slanted aerodynamic top lipo plate. (This is the result of shedding weight from the rear end.)
- Dry frame weight (fully assembled): 17.5 grams.
|Frame Weight||17.5 grams|
|Motor to Motor||119.5mm|
|Frame Shape||Compressed X|
|Main Plate Thickness||2mm|
|Motor Mount Pattern||9mm|
|FC Stack Mount||16×16 or optional whoop AIO bracket|
|FPV Camera Mount||Nano (14mm)|
|FPV Antenna Mounts||Customer rubber holder (1.8mm)|
|Max Stack Height||16mm|
|Warrantied Parts||Bumper to bumper|
|Cams||Runcam Nano 2|
|Prop Size||65mm or 2.5 inch|
For all Armattan warranty claims please contact Armattan Quads Warrranty Claims https://www.armattanquads.com/warranty-claims/
If you require assistance or would like us to resend proof of purchase please contact us here
This HX100 SE T300 Carbon Fiber Frame is customized for HX100 SE FPV Quad.
- Made of T300 carbon fiber material, ultra-light body makes the drone fast and steady in flight.
- Suitable for BETAFPV F4 1S brushless flight controller V2.1 and 1102 13500KV motor. Make your 1S toothpick whoop drone.
- Only weighs 4.0g/pc with 2mm thickness, wheelbase is 100mm.
- The parcel comes with plastic durable package in default, which can protect the package from deformation during the shipping process.
- Material: T300 Carbon Fiber
- Diagonal motor distance: 100mm
- Motor mounting hole: for 1102 13500 motors (Compatible with 1103 motors)
- FC mounting hole: fully compatible with whoop style FC board mounting pattern, 26mm x 26mm
- Weight: 4.0g/pc
- Propellers: Gemfan 65mm 2-blade props(1.5mm shaft hole)
- Motors: 1102 13500KV Brushless Motors
- Batteries: BT2.0 300mAh 1S Battery
- FC & ESC: F4 1S Brushless FC
- Drone: HX100 SE FPV Quad
- 1 * HX100 SE T300 Carbon Fiber Frame
- 1 * 85mm Battery Cable Tie
- 1 * No-Slip Rubber Pads
- 1 * Pack of Screws
Item Name: Camera Canopy for Mobula7
Color option: Transparent Red
Net Weight: 2g
Camera angle could adjustable easily
Best for CADDX EOS2 camera
1 x Camera Canopy set
2 x M1.2*5 Screws (Mount the plastic)
2 x M2*5 Nylon Screws(Mount the EOS2 camera)
*Notes: The M2*5 Nylon Screw should cut to M2*3 in order to fit the EOS2 Cam , or you can buy M2*3 metal screws
Mobula7 HD Fixed nylon column for Crazybee F4 PRO FC and Caddx turtle mount 25mm*25mm convert to 20mm*20mm
Suitable for Caddx Turtle to fit the Original Crazybee F3 / F3 PRO / F4 PRO
The original nylon column for Mobula7 HD
- Fixed nylon column x 4pcs
- Rubber damping ball x 4pcs
- M1.2 x 5 screws x5pcs
- M1.4 x5 screws x4pcs