FPV

70mm 5.8G 2dBi IPEX IPX Omni Directional Linear Brass FPV Antenna
translation missing: en.products.product.regular_price $3.95 Sold Out
translation missing: en.products.product.regular_price $3.95 Sold Out

70mm 5.8G 2dBi U.FL IPEX IPX Omni Directional Linear Brass FPV Antenna

Description
Connector : IPEX 
Cable : RG178 
Weight : 0.9g
Length :70mm
Frequency : 4900 MHz ~5900 MHz
S.W.R : <= 2.5 @5700 MHz ~5900 MHz
Gain : 2dBi 
Impedance : 50 ohm
Usage : RC Model,Wireless AP,Router etc.
Signal Directivity : high-gain omni-directional antenna

Package Included 
1 x Antenna

Eachine EV800D 5.8G 40CH Diversity FPV Goggles 5 Inch 800x480 - HD DVR
OFFER
translation missing: en.products.product.regular_price $149.95 $129.95 On Sale Sold Out
translation missing: en.products.product.regular_price $149.95 $129.95 On Sale Sold Out

Eachine EV800D 5.8G 40CH Diversity FPV Goggles 5 Inch 800*480 Video Headset HD DVR Build in Battery

Includes Australian IEC-C7/ figure 8 Power Cord

Description :
Brand Name : EACHINE
Item Name : EV800D

Appearance
Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt
 
 
Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Re play in MENU
Require C10 card to record full frame rate
 
Diversity
-90dB Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
 
 
Display
Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
Ratio : 16:9, 4:3
View Angle: 140/120 degree(Horizontal/Vertical)
 
Lens
3x boost of the video to acquire intense feel-in-there video;
92% transparent rate distort if light;
 
 
 
Battery
Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
10-22V wide range recharging voltage range, typical recharging voltage is 12V
Charger : 12V,2A, DC 2.5mm
2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.



Frequencies (5.8GHz, with RaceBand)

     CH      CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ


Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching 

Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information;
Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time;
Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 1200mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
1 x EV800D 40CH 5.8G Diversity Goggles with DVR
1 x Clover Antenna
1 x Panel Antenna
1 x Battery Charger
1 x 3S to DC Power Cable
1 x User Manual
1 x Clean cloth
1 x Bag

,,,,,,,,

Happy Model Whoop VTX 5.8g 40ch 25mw~200mw switchable VTX
translation missing: en.products.product.regular_price $24.95
translation missing: en.products.product.regular_price $24.95

Small size, lighter and easy to mount in a regular whoop

Best for the Mobula7 upgraded

Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna U.FL interface
Frequency: 5.8GHz 5 bands 40 channels
Smartaudio ready
Weight: 2g without antenna

HGLRC XJB TX20-V2 Mini 5.8G 48CH Raceband VTX
translation missing: en.products.product.regular_price $29.95 Sold Out
translation missing: en.products.product.regular_price $29.95 Sold Out

HGLRC 20x20mm XJB TX20 V2 Mini 5.8G 48CH PIT/25mW/100mW/200mW/350mW Switchable FPV VTX Raceband for RC Drone FPV Racing 

Description: (User Manual)

Item name: HGLRC XJB-TX20 V2 mini VTX
Output power: PIT/25mW/100mW/200mW/350mW switchable
Control mode: BFOSD control(RX)/button
BAT: 7-26V, BEC 5V-1A
240mA----350mW
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 6 bands 48 channels
Size: 24*24mm(L*W),Hole:20*20mm
Weight: 2.4g
Package Included:
1 x HGLRC XJB-TX20 V2.0 Mini FPV VTX
SucceX Micro F4 Flight Tower System 16x16mm
translation missing: en.products.product.regular_price $64.95 Sold Out
translation missing: en.products.product.regular_price $64.95 Sold Out

PRODUCT DESCRIPTION

SucceX Micro F4 Flight Tower System 16x16mm

Specification:

SucceX F4 Flight Controller

-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target : MATEKF411

SucceX Micro 12A Brushless ESC

-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g

SucceX Micro VTX

-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g

Package Included:

1 x SucceX F4 Flight controller 

1 x 12A Brushless ESC

1 x PIT/25/100/200mW VTX

HGLRC Hammer RHCP 5.8G 5dBi Super Mini Antenna For RC Drone
translation missing: en.products.product.regular_price $7.95 Sold Out
translation missing: en.products.product.regular_price $7.95 Sold Out

Specifications:


Model: RHCP Super Mini 5.8GHz Antenna

Frequency range: 5.5-6.0 GHz

Bandwidth: 500MHZ

Gain: 5dBi

Voltage Standing Wave Ratio <= 1.5

Axial Ratio: 0.74

Dimension: 21*28mm in diameter

Consumption current: <10MA

Polarization intensity: R.H.C.P.

Power supply voltage: DC3.0-5.0v

Noise figure: <1.5db

Axial ratio : 3dBi

Maximum input power: 5W

Output: <1.8

Working temperature: - 40 ~+85 ~C

Storage temperature: - 40 ~+85 C

 

BetaFPV M01 AIO Camera 5.8G VTX (Pin-Connected Version)
translation missing: en.products.product.regular_price $41.95
translation missing: en.products.product.regular_price $41.95

M01 AIO Camera 5.8G VTX comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 48 channels on the 5.8GHz band. The unit is ultra-lightweight only 3g and pins connect with FC, so it is easy to place on Pro Series and Brushed Whoop Drone. 

FEATURE

  • Pins connect with FC, easily Installation
  • Lighter than Z02 AIO Camera VTX, perfect for Micro Drone
  • Suitable for Pro Series and Brushed Whoop Drone
  • 25° and 35° Camera tilt Mount are provided to suit your preference
Camera Weight

      SPECIFICATION

      • Item: M01 Camera AIO VTX
      • TVL: 600TVL 
      • FOV: H:120°/V:100°
      • Video System: NTSC
      • Horizontal Resolution: 640X480 1/4”
      • Output power: 25mW
      • Supply Voltage: 5V
      • Size: 18*14*4.5mm(VTX)
      • Weight: 3g
      • Antenna: RG178 Antenna
      • Frequency: 5.8GHz 6 bands 48 channels
      Wire Lengths

        Camera Mount Different Choice for Flying Experience

        Two types of Camera tilts Mount at your disposal. 35° mount suitable for high-speed flight, while 25° mount for lower speed flight.

        Camera Tilt

        Component Layout Diagram for M01 VTX

        The following diagram describes the organization and wiring of the physical components on M01 VTX board.

        VTX Wiring Diagram

        How to Connect with FC

        M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC

        Flight Controller Wiring Diagram





        PACKAGE

        • 1 * BETAFPV M01 AIO FPV Camera VTX
        • 1 * Camera Mount (25 degrees)
        • 1 * Camera Mount  (35 degrees)

        Package Includes