Camera
HCF7 5.8G 48CH 25MW Transmitter 700 TVL 120 degree CMOS Wide Angle NTSC FPV Camera
Output power : 25mw
Frequency : 40CH
Input voltage : 3.3V 5.5V
Current consumption : 300mA(type)
Camera resolution : 700TVL
Field of view : 120°
Video Format : NTSC
Antenna : Clover antenna/Dipole antenna
Frequency: 5.8GHz 6 bands 48 channels
Size : 13.9″12.0mm ( L*W )
Weight : 3.5g
With Smartaudio function
Specifications:
Output power: 25~200mw switchable
Frequency: 40CHInput voltage: 4.8v~5.5v
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
Frequency: 5.8GHz 5bands 40 channels
Smartaudio ready
Weight: 3g without antenna
Video Output Size: VGA (640×480)
Video Output format: NTSC
Record video size : 1280×720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI
Features:
Short touch the button to Start/Stop Video recorder
The video will split to 2 minutes automatically
Best for upgrade Mobula7 / Eachine Trashcan
Small size , lighter only 3gram and easy to mount in a regular whoop
Built-in DVR(Video size 1280×720)
Auto start when power on
Note: Auto-save when Power off is not supported, please remember to press the stop button after landing
Package includes:
Diamond_VTX x1
JST SH1.0 3Pin wire for camera x1
JST SH1.0 5Pin wire for flight controller x1
Recommended parts to fit the Diamond VTX:
Happymodel Mobula7 V2 canopy
CADDX EOS2 camera
Runcam Nano2 camera
Package included:
1 x RC21M 2.1mm Lens for RunCam Racer Series Micro Swift/Sparrow 1/2 Robin FPV Camera
M01 AIO Camera 5.8G VTX comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 48 channels on the 5.8GHz band. The unit is ultra-lightweight only 3g and pins connect with FC, so it is easy to place on Pro Series and Brushed Whoop Drone.
FEATURE
- Pins connect with FC, easily Installation
- Lighter than Z02 AIO Camera VTX, perfect for Micro Drone
- Suitable for Pro Series and Brushed Whoop Drone
- 25° and 35° Camera tilt Mount are provided to suit your preference

SPECIFICATION
- Item: M01 Camera AIO VTX
- TVL: 600TVL
- FOV: H:120°/V:100°
- Video System: NTSC
- Horizontal Resolution: 640X480 1/4”
- Output power: 25mW
- Supply Voltage: 5V
- Size: 18*14*4.5mm(VTX)
- Weight: 3g
- Antenna: RG178 Antenna
- Frequency: 5.8GHz 6 bands 48 channels

Camera Mount Different Choice for Flying Experience
Two types of Camera tilts Mount at your disposal. 35° mount suitable for high-speed flight, while 25° mount for lower speed flight.
Component Layout Diagram for M01 VTX
The following diagram describes the organization and wiring of the physical components on M01 VTX board.
How to Connect with FC
M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC
PACKAGE
- 1 * BETAFPV M01 AIO FPV Camera VTX
- 1 * Camera Mount (25 degrees)
- 1 * Camera Mount (35 degrees)
Model: AURORA FPV Camera
Lmage Sensor:1/3'Mg SUPER HAD II CCD
Horizotal Resoulution:D1960H 2000TVL
Lens:2.1mm
Signal System:PAL/NTSC (OSD Internal adjustable)
S/N Ratio:>60Db(AGC OFF)
Electronic Shutter Speed:PAL: 1/50-100.000, NTSC:1/60-100,000
Auto Gain Control(AGC):LOW/MIDDLE/HIGH
Back light compensation(BLC):YES
Min lllumination:0.001Lux/1.2F
WDR:D-WDR
DNR:3DNR
Day/Night:Auto/Color/B*W
Power:DC 5V-30V
Net weight:5.g
Dimensions:19mm*19mm*19mm
OSD
Exposure: Brightness/exposure mode/gain
The white balance:Automatic tracking white balance
Day and night mode:Internal automatic/color mode/black and white mode
Video Settings:Contrast/sharpness/saturation/digital noise/video format (N/P)/digital wide dynamic
Language:Chinese/English/German/Italian/Russian
Restore the factory Settings:OK
Save the exit:OK