Plug Type: XT60+ Male or Female Plug
Brand Name: AOK
Item Name: CellMeter 8
Discharge Current: 1A
Balance Current: 1A
Battery Voltage Test Precision: 0.001V
Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery
Servo Test Range: 1000-2000us or 500-2500us
- High visibility LCD display screen
- Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries
- Can be used as Servo tester to test standard and narrow servo.
- Port for discharge plug of NiMh/NiCd batteries
- Can be used to check the battery voltage of Lithium batteries including Lipo, LiFe, Li-Ion, as well as NiMH and NiCd batteries.
- Measure the voltage of both individual cells and full battery voltage, and can also indicate the highest voltage cell, lowest voltage cell and difference
1 x AOK CellMeter 8 servo tester
It’s innovative. It has grip. It’s got style. And best of all? It’s Armattan.
The Gecko is the latest addition to Armattan’s family of mini-freestyle frames. Designed around the best principals that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the multirotor kingdom has to offer.
The tail provides the quality mounting options that Armattan is known for. A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props. If that doesn’t suit your fancy, simply use the elongated M3 holes to zip-tie your dongle in the tried-and-true way instead. Lastly, lets put an end to rear-impact delamination. The carbon itself is protected from impacts by the custom Aluminum standoffs.
And what about the “big W?”
We’re glad you asked. Like you might’ve thought, the entire frame is warrantied. Carbon, aluminium, and titanium are covered under Armattan’s unbeatable lifetime warranty. What can we say, except, “you’re welcome?”
2x Camera-cage braces
8x 6mm button-head M3 bolts
4x 4mm button-head M3 bolts
4x 16mm buton-head M3 bolts
2x 5mm cup-head M2 bolts
2x M3 sunk nuts
2x Camera-saver braces
1x 19.1mm Front standoff (silver)
2x Rear standoffs (black)
4x M3 nuts
1x 2mm Top (LiPo) plate
1x 3mm Main plate (3 inch)
1x Lipo strap
1x LiPo foam pad
4x Dog-bone landing pads
1x Molded rubber VTx antenna holder
|Motor to Motor||139mm|
112mm left & Right
82mm front & rear
|Main Plate Thickness||3mm|
|Hardware||TI camera cage
Aluminium Cam saver
|Motor Mount Pattern||14XX motor pattern|
|Front Stack Mount||M2, 20x20mm (for HD cam board)|
|Rear Stack Mount||M3 20x20mm (for FC stack)|
|FPV Camera Mount||Micro compatible|
|Max Stack Height||22mm|
|Warrantied Parts||All frame components|
|Motor Size||1407 3650KV|
|LiPo||650mAh – 850mAh 4S|
This handy prop ratchet tool allows you to tighten or loosen nylock prop nuts with minimal effort and without having to reset the grip on the tool.
At the core of this, you’ll find a one-way roller bearing and two regular bearings around that for optimal stability, even after hundreds of prop swap cycles.
The prop nut sockets are designed to fit the standardized 8mm hex fitting found on M5 nylock nuts.
The side arms give you great leverage to rotate even the most stubborn locknuts.
These sidearms also act as a 5.5mm ring tool to fit smaller nuts such as those found on your flight controller stack.